The use and maintenance of edge banding machine





      The edge banding machine has high working efficiency, fast and efficient, high precision, safe and reliable, and saves work manpower, so it is not comparable to manual work. The edge banding machine is usually used in various wood processing and solid wood furniture industries, etc. It is an indispensable woodworking machine for modern wood processing enterprises.

 The purpose of edge banding machine:

      1. Pre-milling: Double milling cutters are used for the panel saw. After the cutting saw is processed, there will be ripple marks, burrs or non-vertical phenomena. The re-modification can achieve a better edge banding effect, making the edge band and the board fit more closely, and the integrity and aesthetics are better.

  2. Glue-coated edge sealing: Through a special structure, the double-sided glue of the edge-sealing board and the edge-sealing material can be evenly coated, which can ensure a stronger adhesion.

  3. Straight head: through precise linear guide movement, adopting automatic profiling and high-frequency high-speed motor fast cutting structure to ensure the smooth and smooth cut surface.

  4. Finishing: The structure of automatic profiling and high-frequency high-speed motor is adopted to ensure the smoothness of the upper and lower parts of the trimmed board. It is convenient to repair and process the excess edge banding material above and below the edge band of the plate. The finishing knife is an R-shaped knife. Mainly used for PVC and acrylic edge banding of panel furniture, preferably edge banding with a thickness of 0.8mm or more.

  5. Edge scraping: Eliminate the ripple marks caused by the non-linear motion cutting process of trimming, and make the upper and lower parts of the board smoother and cleaner.

  6. ​​Polishing: Use cotton polishing wheels to clean the processed plates, and use polishing to make the edge-sealing end surface smoother.

7. Slotting: Slotting directly on the side panel and bottom plate of the wardrobe, which not only reduces the process of panel sawing, but also is convenient and quick; it can also be used for slotting of aluminum edging of door panels, edge banding and base materials At the same time, the glue is evenly applied, stepless speed regulation linear, special shape, electronic time control and stroke control, tape feeding and tape cutting length are accurate.
edge banding machine
  The edge banding machine is a large-scale woodworking machine, so the price is relatively high. Therefore, in order to extend the service life of the edge banding machine, it is necessary to regularly maintain and maintain the edge banding machine. This is the knowledge that solid wood furniture must understand.

       Main points of edge banding machine maintenance:
        1. Clean up regularly. It is necessary to clean up the waste and various sundries generated by the machine during the production process on a regular basis to avoid the occurrence of waste accumulation which affects the machine jam and affects the work efficiency. And also clean up all kinds of stains on the surface of the machine to keep the machine beautiful and tidy, so as to prevent the stains from corroding the surface of the machine.
  2, regular inspections. The edge banding machine needs to be checked regularly, because as long as the fault is found before the fault occurs, the edge banding machine can be guaranteed to work normally.

  3. Maintain workshop temperature. The temperature of the automatic edge banding machine cannot be too high or too low during the working process. Too low temperature will cause the oil to freeze, causing the machine to not operate normally; too high temperature will easily cause inconvenience of heat removal, which will cause damage to the motor, so the general workshop temperature is about 20 degrees.
       4. Add lubricating oil regularly. Because the edge banding machine is sometimes worn or even severely worn during the working process, it needs to use lubricating oil for maintenance. The purpose of adding lubricating oil is to slow down the degree of wear of the machine and prolong the scrap time of the edge banding machine.

   5. Replace accessories in time. In many cases, the edge banding machine may cause mechanical failure due to parts problems during use. In order to avoid this situation, it is necessary to promptly replace the more severely worn parts.
  

The above are the main points of the use and maintenance of the edge banding machine. Finally, a warm reminder: a variety of failures may occur in the edge banding machine during the work process, so learn to handle, troubleshoot and solve the problem in time, so that it can be replaced The guaranteed service life of edge banding machine!

推荐阅读